Nov 30, 2022
We know that the use of non-woven slitting machine is very good for the effect of slitting, but we also need to properly control the sound during use. In some cases, noise may occur. Let's come. How to deal with the sound of the non-woven slitting machine?
1. The surface of the cutter wheel is too rough.
2. The dirt on the surface of the cutter wheel is too thick → use a finer emery cloth to remove the surface dust, whether the bearing of the cutter wheel is damaged, or there is no lubricating oil.
3. The installation position of the knife belt is not accurate → check the levelness of the knife belt.
4. Check whether the knife belt of the knife holder is sharp; the knife belt has no curling phenomenon.
5. The knife belt is not tightened → tighten the knife belt, the forward and reverse rotation of the knife belt should be based on the center of the knife wheel
Previous: Paper Bag Machine With Four-color Printing
Next: What Is The Difference Between The Taper And The Control Area Of The Non-woven Slitting Machine?