Description
Nova Co., Ltd. specializes in the production of printing press series, which has been recognized by customers at home and abroad. The 2 Color Flexographic Printing Machine presses are generally favored by customers
Share:
product description
Nova Co., Ltd. specializes in the production of printing press series, which has been recognized by customers at home and abroad. The 2 Color Flexographic Printing Machine presses are generally favored by customers
1.Video introduction
The following is the operation process of 2 color flexographic printing machine
2.Flexographic printing machine parameter
Model | NW-21200 |
Machine Colors | Two colour |
Max. printing width | 1160mm |
Printing material | PE plastic film,Roll paper,Non woven fabric and so on |
Printing length | 100-990mm |
Printing speed | 15-80m/min |
Anilox roll | Metal roller |
Plate Thickness | 2.28&3.94mm 2.38mm(paper,plastic film) |
Register precision | Longitude:±0.15mm horizontal:±0.15mm |
Rewinder/winder DIA | Unwind reel diameter: Φ1000mm Rewind reel diameter: Φ1200mm |
Rewind system | Auto tension system control |
Printing pressure | Mechanical adjust |
Drying way | Electrical heat drying |
Total power | 10kw |
Dimension(L×W×H) | 5100*2300*2200mm |
Weight | 2000kg |
Power | Voltage 220V/380V/440V, 3 PH, 50/60 Hz |
 |  |
3.characteristic
The reason why the flexographic printing machine develops at a constant speed, in addition to the technological breakthroughs in the plate and ink, its own characteristics are an important reason for attracting users.
1. The structure of the machine is simple, so it is easy to operate and easy to maintain. The price of a flexographic printing machine with the same function is about 30-50% of that of an offset printing machine or a gravure printing machine.
2. The material of the cause is highly adaptable. From 0.22mm plastic film to 10mm corrugated cardboard, satisfactory printing results can be obtained.
3. The embossing force is small, about 19.6-39.2N/cm², especially for the printing of corrugated paper and other substrates that cannot withstand excessive pressure.
4. The printing cost is low, mainly because the machine is cheap, the plate-making cost is low, the paper loss rate during the printing process is low, and the production cost is 30-50% cheaper than gravure printing.
5. Good printing quality. The short ink path inking system with anilox rollers not only simplifies the structure of the inking system, but also enables quantitative control of film thickness. The breakthrough in high-performance photosensitive resin plate technology has greatly improved the resolution and dot reproducibility of the printing plate (up to 1-95%). Flexo printing can achieve 300-line/in color gradation printing, and the printing effect is comparable to offset printing and gravure printing.
